VK VK YouTube YouTube
Test drive

Bulat 3 axles

Installment and credit

Universal all-terrain vehicle

Replaces 5 models of special equipment
Для быстрого и комфортного передвижения по снегу
Для уборки снега, сельскохозяйственных и заготовительных работ
Swamp walker
Для преодоления болот, топей, мари и сборки ягод
Преодоление грязи, канав, полей и умеренного бездорожья
Для уверенного передвижения по воде

Dobrynya Bulat 3 axles

The Dobrynya Bulat amphibious all-terrain vehicle is the top model in our line of all-terrain vehicles, we tried to take into account all the wishes of our customers and put them together in Bulat!

The Dobrynya Bulat all-terrain vehicle is equipped with LONCIN gasoline four-stroke two-cylinder engines with a capacity of 24 hp, 27 hp and 30 hp. The engine is located in front, the drive is rear. The engine has a system
forced air cooling. The basic configuration of the model includes a tensioner roller, thanks to which the angle of attack of the caterpillar is 45 ° and it is possible to adjust the tension of the caterpillar. The all-terrain vehicle is equipped with a reinforced bridge from the GAZ 3110 car and a gearbox with a 4-satellite differential from the Gazelle truck. The capacity of the all-terrain vehicle is from 2 to 6 people with a load of up to 500 kg. Dobrynya Bulat in the basic version is made with a 3-axle suspension and 6 support wheels with cargo reinforced rubber R16C 185/75.

With its excellent cross-country ability, the snowmobile is able to accelerate on land up to 40 km / h, the speed of movement on water is 3-4 km / h, and with an additional outboard outboard motor, the speed can reach up to 7 km/ h. Due to the low ground pressure (0.05 kg / cm2), the Dobrynya Bulat all-terrain vehicle can easily move on any soil, snow or swamp.

Unique design


The Dobrynya Bulat all-terrain vehicle is equipped with four-stroke Loncin gasoline engines. These are the best Chinese engines in the class in terms of their reliability, traction, unpretentiousness and moderate fuel consumption.

The power of the installed two-cylinder Loncin engines is from 24 to 30 hp.

At your request, we can equip the all-terrain vehicle with Honda, Lifan or Zongshen engines.


All Dobrynya Bulat all-terrain vehicles are equipped with a welded frame integrated into the body.

The frame is made of profiled pipe, of various thicknesses and cross-sections.


We install bridges from GAZ 3110 on all our all-terrain vehicles already in the basic configuration.

Before integrating the bridge into the body of the all-terrain vehicle, we modify the semi-axles by installing additional seals to protect the bearing of the semi-axle from moisture.

GAZ 3110 Bridge


The body for all-terrain vehicles is made of high-quality steel with a thickness of 1.5 to 2 mm.

All sheet parts are laser-cut on a CNC machine and bent on a bending CNC machine.


For all models of Dobrynya Bulat, we necessarily install a reinforced 4-satellite differential from a Gazelle truck in the bridge.


We install new manual transmissions from VAZ 21083 on all our all-terrain vehicles. This box is distinguished by its reliability and unpretentiousness.

We modify the box ourselves and remove the 5th gear.


We make the tracks from a 5-layer frost-resistant conveyor belt with a thickness of 13 mm.

The tracks are made of metal with a thickness of 4 mm, the canines are made of a rod with a diameter of 10 mm.

Additionally, you can order tracks with U-shaped tracks with reinforced ground hook from a channel 4 mm thick.


1900 mm
1300 mm
2800 mm


Length, mm 2800
Width, mm 1900
Height (without rigid frame), mm 1300
Height (with rigid frame), mm 2000
Weight, kg 720
Clearance, mm 350

Cooling system:

Cooling system Air


Track Steel track on a rubber-cord tape, width 460 mm


Body Steel boat, thickness 2 mm


Chassis Track mover with a leading rear axle

Brake system:

Brake system Hydraulic disc two-piston

Standard equipment:

Starter Manual
Variator Safari
Transmission 4-speed manual
Axle GAZ 3110
Wheels R16C 185/75 with heavy duty tires
Trucks with increased grouser (height 32 mm)
Drain plugs 2 pcs.
Tensioner tracks+stray roller
Front bumper power, corrugated pipe 40x40 mm
Winch platform Yes
Water cutters 4 pcs
Dashboard with backlight, engine temperature, oil pressure gauges and voltmeter
Hour meter Yes
Front Passenger Handle Yes
To get a consultation


A full description of the complete sets and the cost of all-terrain vehicles, as well as prices for additional equipment are indicated in the price list. You can get more detailed information about our all-terrain vehicles, installment terms and any questions you are interested in by calling us at the phone number 8 495 374-92-78